Showing 1–12 of 27 results
Sort:
Air Blower for Cooling the LSP-600 Transducer
This electric air blower is used to cool the ACT-22-LSP piezoelectric transducer supplied with ISM's LSP-600 ultrasonic liquid processor configured in the flow-through mode. With this device, the heat generated in the transducer during continuous operation is efficiently removed, allowing the processor to work continuously for extended periods of time (up to about 1 - 2 hours).
Air-Cooled Transducer (ACT-22-LSP) for LSP-600 Ultrasonic Processor
An ultrasonic transducer converts electric energy coming from an ultrasonic generator into mechanical vibrations. The ACT-22-LSP air-cooled piezoelectric transducer has the power rating of 600 W. It is designed to work with the LSP-600 ultrasonic processor and all LSP-600-compatible ultrasonic horn types.
Capsule Filter
Price range: CHF 243.00 through CHF 727.00In-Line Capsule Filters for LSP-600
Filtration though a hydrophilic membrane with 0.22 micron and 1 micron pores is an important post-processing step of ultrasonic nano-emulsification with NanoStabilizer®-LT and NanoStabilizer®-LSO, which removes such particulate contamination as dust, large microorganisms, plant matter and titanium particles. In-line capsule filters are reusable and can typically handle several liters of product before having to be back-flushed with purified water to clear out the particulates retained by the membrane. *Please note that gaskets, clamps, adapters, and pump are not included.
Cartridges for Large- and Ultra Large-Capacity
Price range: CHF 98.00 through CHF 170.00Cartridges for Large- and Ultra Large-Capacity In-Line Filter Assemblies
Filtration through a hydrophilic membrane is an important post-processing step of ultrasonic nano-emulsification, which removes particulate contamination such as dust, microorganisms, plant matter, and titanium particles.
Heat Exchanger for ISP-3600 ultrasonic processor
The heat exchanger is used as part of the ISP-3600 ultrasonic system's flow-through configuration in order to precisely control the temperature of the processed liquid via chilled water.
Impeller Assembly for 2 L Storage/Mixing Vessel
This Impeller Assembly is designed to be used with the 2 L Storage/Mixing Vessel and the Large-Capacity Magnetic Stirrer With Hotplate. It is typically included as part of the LSP-600 turn-key ultrasonic system (flow-through configuration), which is suitable for processing small volumes of liquid up to 2 L.
Jacketed Beaker
Price range: CHF 742.00 through CHF 1'077.00Jacketed Beaker for ultrasonic processor
This jacketed stainless steel beaker is designed to work in conjunction with the ultrasonic processor configured in the batch mode. It can be used to process up to 1.4 L - 3 L of liquid at a time. The beaker includes a water-cooling jacket that helps maintain the temperature of the processed liquid at the desired level.
Large and Ultra Large Capacity Filters
Price range: CHF 1'541.00 through CHF 1'850.00Large- and Ultra Large-Capacity In-Line Filter Assemblies
Filtration through a hydrophilic membrane is an important post-processing step of ultrasonic nano-emulsification, which removes particulate contamination such as dust, microorganisms, plant matter, and titanium particles.
Large-Capacity Magnetic Stirrer with Hotplate
CHF 1'028.00Large-Capacity Magnetic Stirrer with Hotplate
This Large-Capacity Magnetic Stirrer with Hotplate is part of the LSP-600 ultrasonic processor's turn-key flow-through configuration, where it is used to premix the contents of the 2 L Storage/Mixing Vessel. It is also used during the preparation stage of ultrasonic nano-emulsification (carried out with all our processors) for dissolving bioactive extracts in NanoStabilizer®-LT and/or for pre-mixing the resulting oil phase with water.
Magnetically Coupled Mixer for ISM Cone-Bottom Storage/Mixing Tanks
This energy-efficient, easy-to-maintain magnetically coupled mixer with precise speed control and reversible direction of rotation is designed to work best with ISM 25 L and 50 L stainless steel cone-bottom storage/mixing tanks. Both tanks are designed to be used in conjunction with our BSP-1200 and ISP-3600 ultrasonic processors configured in the flow-through mode as well as in general liquid mixing applications. The mixer ensures homogeneity of processing and complete isolation from the outside environment without requiring any mechanical seals. The mixer can be purchased as a replacement part for your ISM mixing/storage tank or as a second mixer in order to create the dual-mixer tank configuration, as shown below.
Mylar Acoustic Washers (Set of 20) for Ultrasonic Processors
Keep extra mylar washers for your ultrasonic processor. These washers are compatible with all ISM ultrasonic processors and are used as part of the transducer-to-horn assembly.
NanoStabilisator®-LSO
Price range: CHF 193.00 through CHF 752.00NanoStabilisator®-LSO
NanoStabilizer®-LSO is a proprietary all-in-one blend of natural ingredients necessary to ultrasonically nano-emulsify hydrophobic bioactive extracts (full- and broad-spectrum oils, distillates, isolates, vitamins, essential oils, terpenes, nutraceuticals, pharmaceuticals).Recently viewed
Tri-clamp connections
Tri-Clamp connections 3/4" - Product connections for MT 5100 S2 G1/2'' - TC 3/4'' DIN 32676-CTri-clamp / Tube connections TC 1/2" / ø13/8 PTFESeals ( MT 3100 S2 )
Tri-Clamp connections 3/4" - Product connections for MT 5100 S2 G1/2'' - TC 3/4'' DIN 32676-CTri-clamp / Tube connections TC 1/2" / ø13/8 EPDM Seals ( MT 3100 S2 )
Tri-Clamp connections 3/4" - Product connections for MT 5100 S2 G1/2'' - TC 3/4'' DIN 32676-CTri-clamp / Tube connections TC 1/2" / ø19/16 EPDM Seals ( MT 5100 S2 )
Tri-Clamp connections 3/4" - Product connections for MT 5100 S2 G1/2'' - TC 3/4'' DIN 32676-C
